Double Glazing Seal Repairs
When double-glazed window seals break this can lead to damp and mould. This can cause damage to the frame and walls surrounding it, and also impacting your health.
Fortunately, the majority of uPVC windows can be repaired with resealing, rather than replacement. A glazier will typically clean the frame of the window and the glass and apply a fresh layer of sealant, and smooth it.
Water Leaks
Window seals are made to keep moisture from your home. But, when they begin to wear down, it can cause water leaks around your windows. Not only is a leaky window annoying however, it could also cause costly damage to the structure of your home. It is essential to recognize the issue early and have it repaired by an expert before it gets worse.
Often, the source of your leaking windows isn't in the glass itself, but on the frame and sill. A leak in this area is the most common indication of a failing window seal. This can be due to damage to the seal caused by weather or aging wear-out caulking, or even a blocked drain resulting in an accumulation of ice or water.
The appearance of water between double-glazed panes is another common indication that the window seal has failed. It's not as risky as a water leak, as the water does not travel far enough to get into your home. However, it could indicate that the inert gas that is sandwiched between the panes has lost its lubrication, which will lower the insulation value of your windows.
The final indication of a failing window seal is condensation that forms between the panes. This could be due to a failed seal or a damp climate within your home. It could also be due to a issue with the glass. It's not just annoying however, the condensation could lead to mould and mildew growth within your home. This can be a challenge and costly.
If you are seeing these indicators, it's the time to have an inspection of your double-glazed windows. Repairs or replacements will help protect your home from water leaks, reduce energy costs, and even stop drafts. It's a small expense to pay for your family's safety and comfort. Contact Thompson Creek Window to discuss your options regarding window seal replacement or repair. Our experts are always available to assist you! We offer assistance to homeowners in the Mid-Atlantic region.
Condensation
A broken seal for double glazing can allow water to get into the insulating gap. The water could cause condensation inside the window panes and may cause fogging or misting.
If you notice condensation developing within your home, it's the perfect time to contact an experienced double glazing repair service. Condensation could indicate that the vacuum seal created at the factory failed and moisture has seeped into the insulation.
Condensation is caused by a variety of factors and is usually caused by gaskets, sealants, or insulation in the uPVC frames of the windows. There are a variety of options for double glazing seal repairs however it is essential that the new seals are correctly size to ensure the best seal and a perfect fit.
Gaskets are typically composed of polyurethane, which is a material that can be used to fill in gaps between double-glazed units. These are designed to be long-lasting but they are susceptible to deterioration over time due to natural wear and tear as well as exposure to different temperatures and weather conditions throughout the year.
As time passes the foam will shrink or crack over time. This can lead to cracks in the seal and allow moisture to get into the double-glazed window. This can lead to condensation and a decrease in energy efficiency.
High Wycombe window repairs -sealing the windows is one option to address this issue. But, this isn't guaranteed to fix the issue as it may only eliminate the condensation that has formed and won't address the underlying issues that are causing the double-glazed windows to leak or develop condensation.
A professional who offers an insurance-backed warranty should replace your windows in full. This means that in the event that the company fails or is shut down, you will still be protected by the insurance. It's important to note that your replacement windows should be warranted for at minimum 10 years.
Misting
As the fall months get closer, it's a good idea check that your double glazing seals are in good working order. The damaged seals on your windows not only affect the insulative properties of your windows but can also lead to condensation, mold and damp. To prevent further damage to your double-glazed windows and reduce energy costs, it's important to repair any issues as soon as you can.
Double-glazed windows consist of two glass panes which are held together by a gas-filled inner space. A layer of sealant on the outside fills the gap between the uPVC frame and the glass. This is crucial to maintaining the air-tight seal which keeps cold and warm air from your home, saving you money on your heating bill. These seals can become damaged over time due to the weather, aging, or improper installation. The magic insulation formula which makes double-glazed windows so efficient could begin to degrade once this happens.
If not checked or unchecked, damaged or defective seals can lead to condensation and damp which will not only ruin the appearance of your windows but can also impact your health. Moisture and dampness can cause damage to ceilings, walls floors, and other surfaces within your home. They can also cause allergens and irritants which are detrimental to your health and the health of your family members.
The most frequent issue that double glazing suffers from is misting between the panes. This happens when moisture is absorbed into the insulated area of your windows. It can be difficult to fix without professional double glazing repair.
There are DIY ways to deal with this issue, however, we'd advise against it as it's not only risky but also extremely messy and damage your windows. These methods involve drilling holes into your glazed unit and using chemicals to eliminate fog and condensation. This could cause a number of problems, such as the possibility of exposing your windows and units to water damage.
Professional glaziers have the expertise and tools required to safely reseal your uPVC frames and give you lasting results. In addition, they can also offer advice on the best ways to keep your uPVC windows in good shape to prevent any future problems.
Draughts
A draught from your window is a sign that the sealant has failed and must be replaced or repaired. This will stop cold air from entering your home. It will also improve efficiency in energy use, decrease heating bills, and increase the comfort of your home.
It is important to remember that some draughts are not caused by window seals but rather the gap between the frame of the bricks. In some cases it may be possible to fix this by simply filling the gap with silicone caulk. If this does not work, you'll need to have the seal professionally repaired.
If the sealant around a double-glazed window starts to degrade it allows water infiltration and can lead to dampness or even mold in certain instances. This can then affect your health and may be detrimental to the property. It is essential to address any water leaks as soon as you spot them. If your windows are still covered by a guarantee, it is worth checking with the company you bought them from, as they might cover the cost of the repairs.
The windows themselves are usually covered by a guarantee that can be 10 years or more however some businesses offer lifetime warranties - so it is worth looking into this information. If your double glazing is under warranty, it's worth calling the company you bought them from as soon as possible and providing them with details of any issues you are having. It is best to contact the company in person, or by email and letter. This will ensure that everything is documented and clear.
It is important to note that draughts can often be caused by faulty hinges, not a lack of effective seals. The hinges are responsible for closing the window sash (the section that you open) but they can become stiff over time if they are not regularly oiled. This can leave an opening between the sash and the frame and allow cold air to enter. Replacing the hinges will fix this issue without affecting window seals.